• Skip to secondary menu
  • Skip to main content
  • Skip to primary sidebar
  • Home
  • About Me
  • Subscribe
  • Contact Me

Mary's Thrifty Chic

Upcycling thrift shop clothing/sewing

  • Jackets
  • Blouses
  • Dresses
  • Skirts
  • Sweaters
  • T-shirts
  • Sewing
  • Refashioned Upcycled Clothing

sleeevless

Tie Front Sleeveless Blouse

August 17, 2019 By Mary Peterson 12 Comments

My newest project in my busy corner of the world!

Hello Refashion Friends!

I have been hard at work in my studio making refashions happen! Getting used to my new site has been challenging but I am learning new things every day. Make sure you put your email in the subscribe area of the sidebar to receive automatic updates every time I post.

Please note: This website contains affiliate links. An affiliate link means that I may earn advertising/referral fees if you make a purchase on my link, with no cost to you.  It just keeps my little blog afloat! Thank you!

I know you are dying to see how this latest project started so let’s get going… The tutorial is a long one but it is worth it!

Before

I picked this men’s shirt up for about $3.50.

This chambray stripe shirt was in like new condition. It appeared to have been never or rarely worn. I love anything chambray or blue jean friendly so it had to be mine. The goal was to make it more feminine and work appropriate for those initial days of school in the sweltering Southern California heat.

After

I’m ready for work in the little number!

Tutorial

Step 1-Cutting

Cutting the blouse using a well fitting pattern.
Here you can see a close up of the little triangle of fabric you need from the sleeve to keep the armhole complete. (Don’t worry, I will show you how to cover that up later.

The first step was to open the side seams all the way up through the sleeves and exactly line up the front and the back on the centers as shown. Then I laid my pattern on top with the shoulder seams pinned together. In the picture you see the sleeves already cut off, but I didn’t cut them off until my pattern was set. This is because you might need some of the fabric from the sleeves to make a complete armhole with your pattern. This is because men’s shirts have armholes that are way too big. I cut it this way to get the armhole spot on but at this time I do not cut the side seams or length.

Step 2:Pockets and darts

Pocket Before
Pocket area after removal

The next step was to remove the pockets and sew the darts. You can see this was tough to do but I had plans to make my own pockets from the sleeves.

Finished pocket

Step-3-Side seams and gussets

Here is what the underarm looks like before I create a custom gusset
I shaped it to cover the ugly and I will take it off to duplicate it for the other side.

First I sewed the side seam and and you can see what that looks like before I cover it up with a custom made gusset. the picture on the right is gusset shape before I duplicate it for the other side.

Making a gusset is not an easy task but I think it finishes projects much better than leaving the seams of the old armholes showing. I’m planning on getting a Youtube site going and promise to show you the process from start to finish once I get it rolling.

This is how it looks after the gusset is sewn in and the armhole is finished and topstitched.

Step 4-Armhole finishing

Two Self bias strips were made from the scraps of the sleeves and hem
Then I pinned and basted the lace to the seamline.
Next, I pinned on the bias tape and sewed them both down at once.
This is what it looks like inside after finishing. I turned the bias over, pressed and top stitched down the raw edges with a 1/4″ topstitch.

Step 5-Bottom hems

I turned a 2″ hem . Notice that I left the snap on the inside. It would cause too much trouble to get rid of it.
I stitched the edge of the hem too give support.
I turned the outside of the up 1/4″ and topstitched it down,
Here you can see the edge stitching on the bottom and the start of the little loop that will hold the bottom tie in place.

Step 6-Front ties

I cut up the cuffs to get fabrice to make the ties
Pieced it together
Then finished the edge with some plain blue from the sleeve stripes
This is the finished tie ready to be attached. You can see how the bottom of the tie threads through the loop to hold it in place.
It is ready to go!

It took some time, but the end result was very satisfying. Questions? Comments? Opinions? I can’t wait to hear them all.

Talk to me!!!

Happy Refashioning,

Mary, Thrifty Chic

Filed Under: Blouses Tagged With: sleeevless

Primary Sidebar

Get New Posts!

When I add a new post, you'll get a notice in your inbox!

Patterns at a Great Price!

Recent Comments

  • Mary Peterson on Old #7 Mens Shirt
  • Marieke Steiner on Old #7 Mens Shirt
  • Mary Peterson on Old #7 Mens Shirt
  • Mary Peterson on Old #7 Mens Shirt
  • Evi on Old #7 Mens Shirt

The Renegade Seamstress

the-refashion-handbook

Copyright © 2026 · MarysThriftyChic.com | Privacy